nut bolt
英 [nʌt bəʊlt]
美 [nʌt boʊlt]
带帽螺栓；螺钉
双语例句
- How can someone, hour after hour, day after day, year in and year out, tighten approximately the same nut to the same bolt and not go mad?
一个人怎么能时复一时，年复一年地把几乎相同的螺帽拧到相同的螺栓上而不发疯的呢？ - Have you ever used a hammer and screwdriver to loosen a nut from a bolt?
您是否曾经使用一个锤子和螺丝刀来卸下一个螺母？ - When it does, a socket wrench is much more effective at loosening a nut from a bolt than a hammer.
如果匹配，那么用套筒扳手来拧开一个螺母肯定比用锤子方便。 - Otherwise, you might feel as if you are using a socket wrench as a hammer hitting the handle of a screw driver to loosen a nut and bolt.
否则，您可能感觉到像用锤子一样使用一个套筒扳手来敲击螺丝刀手柄而拧开螺栓的螺母。 - And the heart of the house really is the Victorian range. 1890s, fully restored, every nut and bolt, working perfectly even after 120 years. It's marvellous.
整个房屋的中心就是这个维多利亚时代的炉灶，完全复原出了19世纪90年代的样貌，精细到每一颗螺钉和螺母，甚至再过120年，它仍然可以完美的工作。 - Unscrew fastening nut and remove ground strap from the threaded bolt.
拧下紧固螺母并从螺栓上拆下接地端。 - The movable device mainly consists of the nut, bolt, lifting wedge, backseat, supporting seat of the clamp plate, spring and pressure plate and so on.
活动装置主要有螺母、螺栓、提升楔块、后座、座板支座、弹簧以及压板等组成。 - The experimental results show that the bolt can lead-in the nut successfully, and verify the reasonableness of bolt lead-in device mechanism design.
在螺栓引入装置试验样机上进行螺栓引入试验，结果表明螺栓能成功引入螺母，验证了螺栓引入装置结构设计的合理性。 - A rubber gasket seal is used between a clamp nut of a barrel screw bolt and the outer wall of the barrel body of the utility model.
筒体螺栓的紧固螺母和筒体外壁之间也采用橡胶垫圈密封。 - Remove the lower suspension arm nut and bolt from the axle bracket.
从车轴支架上拆去下端悬吊臂螺帽和螺栓。 - He described the former as a nut and bolt that is carried by a donor corneal skirt.
他把前一种描述为由供体角膜环固定的瓶子和盖子。 - A wrench with a hook that fits over a nut or bolt head.
有一个钩子套在螺母或螺栓头的扳手。 - A fastener made by screwing a nut onto a threaded bolt.
在螺栓上有车削螺纹的扣件。 - When the Chinese arrive, offering to sell two nuts for every British bolt, the British nut industry goes bust and the unemployed workers are hired by the bolt industry.
这时中国人来了，提议以每2颗螺帽交换一个螺旋。于是英国螺帽行业倒闭，失业工人转而受雇于螺旋行业。 - A hand tool that is used to hold or twist a nut or bolt.
用来上紧或扭螺母或螺栓的手工具。 - Research on the Influences of Internal Oblique Nut on Bolt Bearing Capacity
内斜螺母对螺栓承载能力影响的研究 - Hexagon bolts and nuts, hexagon socket head cap screws, thread bar, carriage bolts, Nylon lock hex nut, flat washer, fish bolt set, standard fasteners etc.
六角螺母，六角螺栓，自攻钉，牙棒等。非标件生产与出口。 - By optimizing the radius of rounded corner at the root of thread and the structure of screw nut, and by changing the diameter of the root of thread, the concentrated stress was reduced, and stress distribution was improved for higher fatigue strength of the screw bolt.
通过优化螺栓螺纹根部圆角半径和螺母结构、改变螺纹根部直径的方法，缓解螺纹根部的应力集中，改善应力分布，实现提高螺栓疲劳强度的目的。 - To the reason of fatigue destruction of the rail bolt, carry on the structure analysis that increase the radius of round corner of whorl root, change the height of the whorl, change the appearance structure of the nut to the ordinary triangular rail bolt.
针对钢轨螺栓的疲劳破坏的原因，对普通三角形钢轨螺栓进行结构上改进，提出增加螺纹根部圆角半径，改变螺纹高度，改变螺母外形结构等方法。 - The static design of electrohydraulic servo system of the experiment machine for nut or bolt crosswise vibration
螺栓、螺母横向振动试验用电液伺服振动台系统的静态设计 - Should Nut Be Able to Break Bolt?
螺母竟然能使螺栓断裂吗？ - In this paper the anti-breaking mechanism of the nut is analyzed. A calculation model of the load distribution in the newly-designed bolt connection is established, and the anti-breaking performance of the nut is appraised based on comparison with ordinary bolt connections.
主要对这种新型螺母的防断机理进行了分析，建立了螺栓联接载荷分布的计算模型，并通过与普通螺栓联接的比较，对这种新型螺母的防断性能进行了评价。 - Contact problems between concrete base surface and column base, bolt nut and neighborhood plate, bolt shank and bolt hole are simulated really.
有限元分析中模拟了底板与基础面之间、锚栓垫片与底板之间、以及锚栓与混凝土之间的接触作用。 - Considering the contact characteristic of bolt and nut, we adopt the measure of local coordinate transformation and the compatibility technology about the dis-placements between bolt and nut.
考虑到螺栓与螺母的配合特点，在螺纹面处采用了局部座标转换方法及法向位移协调处理技巧。 - The analysis adopts three-dimensional triple-nonlinear FEM, factors such as bolt pretension, interaction of bolt head, nut with plates, compressing between bolt shanks and holes, fraction between faying surfaces and welding connections.
分析采用三维三重非线性有限元，完全考虑了螺栓预拉力、螺栓头（帽）与板的相互作用、螺栓杆与孔壁的相互挤压作用、接触面的摩擦作用。